Economizer system overrun carburetor 2108, 21081, 21083 Solex and its modifications designed for forced off the fuel supply to the cylinders of the engine through the carburetor idle speed when engine braking (coasting with gear engaged and fully released pedal "gas").
- Faulty zlektromagnitny valve. - Faulty control dodge vin lookup unit solenoid valve. - Oxides, dirty or damaged contact screw "quantity" dodge vin lookup of the fuel mixture. - Damaged dodge vin lookup connecting wires or oxidized their tips. - Jumped out plugs of the connecting pads.
If it does not click, then Pigtail connect the positive terminal of the battery and the conclusion of the solenoid valve. Click there - the valve is OK, but faulty dodge vin lookup control unit or connecting wires. It does not click - a problem with the valve and must be replaced.
In addition, you can check the serviceability dodge vin lookup of the solenoid dodge vin lookup valve and it is installed correctly by removing at idling engine, tip of a wire from the output of the valve. The engine should stall. If he is not stalled, then may be hung in the valve needle or is not fully tightened.
Valve-wrenching, take out the fuel jet, check the mobility of its needle. Wrap the valve back hand wire on it until it put on, start the engine and continue on to wrap it has an open end wrench. Wrap slowly and until the engine starts to stall. Next we put on the output wire of the solenoid valve - the engine would normally earn, but after disconnecting the wires to stall.
Inspection and maintenance of the control unit 1 Take a voltmeter and connect one of its output with the output of the solenoid valve, and the other terminal to the "weight" of the car (in the role of the "masses" may speak of body parts, the metal part of the engine or "minus" battery).
If you suspect a problem with the screws "quantity" (oxidized or damaged contact, broken wire screw) it is necessary to carry out the same checks as for the control unit. Only disable the wire leading to the screw (green in the diagram) and closes it to the "masses." If an increase in speed voltage drops, and with a sharp reset rises to 10, then the screw is defective, and the control unit is OK if the voltage rise and fall occurs, the control unit is faulty. dodge vin lookup
- Visually inspect the wiring for an open or fracture. - Remove the strip from the control unit and measure the voltage on pin 4. Must be at least 10. - Strip the tips of wires from oxidation. - Check the landing terminal blocks. - With greater scrutiny from the scheme, dodge vin lookup has rung connecting wires with a multimeter, turn disconnecting them from the pad.
Tweet This entry was posted 4/19/2014 author turkey in category Service and carburetors 2108, 21081, 21083 and Solex 2105-2107 Ozone tagged inspection, repair, system, Solex, EPHH. Navigation Calibration data DAAZ 1111-1107010 carburetor Solex Inspection and maintenance of the system EPHH carburetor 2105, 2107 Ozone
You may use these HTML tags and attributes: <a href="" title=""> <abbr title = ""> <acronym title = ""> <b> <blockquote cite = ""> <cite> <code> <del datetime = ""> <em> <i> <q cite = ""> <strike> <strong>
Users: 16 Guests, 3 Bots category Articles Engine (7) Malfunction of the engine connected to the carburetor (10) Parameters and Calibration dodge vin lookup data Solex carburetors in 2108 and 2105, 2107 Ozone (12) Miscellaneous (18) Adjusting the carburetor (12) Repair and Maintenance carburetors 2108, 21081, 21083 and Solex 2105-2107 Ozone (14) The car ignition system (10) Fuel System (5) Tuning the carburetor (9) Device dodge vin lookup carburetor (22) Search the site twokarburators.ru Search: Search on similar sites
2105 2107 2108 2109 21081 21083 21099 VAZ Ozone Solex EPHH airbag dodge vin lookup data refinement engine throttle valve needle ignition chamber carburetor valve cap pump malfunction speed drive failure applicability check cleaning dodge vin lookup fuel adjustment system repair system Calibration fuel accelerator device idle stroke stroke single small survey
Popular articles today "failure" when on ... 15204 views | posted on April 5, 2014 Adjusting the fuel ... 7234 views | posted on April 5, 2014 Check the high p ... 6494 views | posted on April 25, 2014 Contact 5528 views | posted on April 12, 2014 on the site twokarburators.ru dodge vin lookup ... 5271 views | posted on April 6, 2014 Installation of the moment ignited ... 4609 views | posted on April 6, 2014 Volatile holos
No comments:
Post a Comment